|
| |
|
 |
TECHNICLE QUALIFICATION |
| Model |
Capacity
(Basis of B.D. 1.0 (M3) |
Plate Thick - ness |
Total
Ht. |
Top Area |
| PS-0.1 |
100 kg (0.1M3) |
3 |
525mm |
500 x 500 |
| PS-0.2 |
200 kg (0.2M3) |
3 |
660mm |
625 x 625 |
| PS-0.5 |
500 kg (0.5M3) |
3 |
950mm |
900 x 900 |
| PS-1 |
1 TON (1.0M3) |
5 & 3 |
1500mm |
900 x 900 |
| PS-2 |
2 TON (2.0M3) |
5 & 3 |
1575mm |
1250 x 1250 |
| PS-3 |
3 TON (3.0M3) |
5 & 3 |
1680mm |
1500 x 1500 |
| PS-5 |
5 TON (5.0M3) |
5 & 3 |
1950mm |
1800 x 1800 |
| PS-10 |
10 TON (10.1M3) |
5 & 3 |
2250mm |
2500 x 2500 |
| PS-20 |
20 TON (20.0M3) |
6 & 3 |
3135mm |
3125 x 3125 |
| PS-30 |
30 TON (30.0M3) |
6 & 3 |
3450mm |
3750 x 3750 |
| PS-40 |
40 TON (40.0M3) |
6 & 3 |
3750mm |
4375 x 3750 |
| PS-50 |
50 TON (50.0M3) |
6 & 3 |
3875mm |
4375 x 4375 |
| PS-60 |
60 TON (60.0M3) |
8,5 & 3 |
4375mm |
4375 x 4375 |
| PS-80 |
80 TON (80.0M3) |
8,5 & 3 |
4700mm |
5000 x 5000 |
| U-100 |
100 TON (100.0M3) |
8,5 & 3 |
5000mm |
5625 x 5625 |
|
| |
| PRINCIPLE WORKING |
| |
These are being maded in different shape and size depending upon the property of the material, which is to be stored. Shape and size also depend upon site condition and the size of the Silo/ Hopper it self. It also designed as per the available height of the roof and the required height of the discharge.
Discharge system is usually provided at the bottom and sometime from one of its side. The discharge gate is design on the basis of physical properties of the material flow, particle size and rate of flow of the material. It also depends upon required automation to control the discharge. Hence while asking for Silos/ Hopper all such detail should be provided so that we may design the right size and shape of Silos/Hopper. |
| |
| This may be made even of bigger sizes to suit the project. This silo is also available in stainless steel material. |
| |
| |
| |
Impact Pulverizer ll Ultra Fine Turbo Mill ll Micro Pulverizer ll Pin Mill / Disc Pulverizer ll Spice Pulverizer ll Disintegrator ll Super Hammer Mill
Roll Impector ll Ball mill ll Roll Crusher ll Pre Crusher ll Jaw Crusher ll Shredder ll Balling Press |
| |
